-
Features
Support Angle Adjustment Shims Included
- Depending on the hub width, the supports may open outward, causing the wheel to sit at an angle when secured.
- The FT-100 includes support angle adjustment shims to help hold the wheel horizontally when the supports are angled.
- This makes it easier to position the wheel correctly for truing.
- The shims are not symmetrical. Install them in the direction and position specified in the instruction manual for your wheel.
Compact Folding Design
- The stand folds down into a compact size when not in use, making it easy to store and carry.
- Its portable design is suitable for home maintenance, bicycle shops, and events.
Lateral and Radial Runout Measurement
- A lateral runout gauge checks side-to-side rim movement, while a radial runout gauge checks vertical rim movement.
- These gauges allow you to monitor rim runout while adjusting spoke tension.
Fits Wheels up to 29-inch (700C)
- The FT-100 accommodates wheels up to 29-inch (700C).
- It supports a wide range of wheel sizes for road bikes and mountain bikes.
-
Support Angle Adjustment Shims
Use the shims supplied with the FT-100 in the combination specified for your hub width and axle type.
Front Hub Shim Use 12 × 100 mm Thru Axle Use 15 × 100 mm Thru Axle Use* 15 × 110 mm Boost Hub Use Other Compatible Wheels Refer to the Support Angle Adjustment Shim Set Instruction Manual 
- *The instruction manual also shows an alternative setup without shims for 15 × 100 mm front hubs.
- The shim position and the combination of shims, spacers, and adapters vary depending on the hub. Refer to the instruction manual for details.
-
FCG-310 Wheel Centering Gauge (Optional)
- A tool for checking the symmetry of a wheel.
- This lightweight aluminum wheel centering gauge features a folding design for easy storage in a toolbox.
- Compatible with wheels from 18-inch to 27-inch, including 700C.
- Accommodates hub widths up to 140 mm.
-
Cautions 1
- The FT-100 is a portable wheel truing stand intended for basic use. Its precision, stability, and reliability are lower than those of professional workshop equipment.
- The FT-100 alone can only check and correct wheel runout. A wheel centering gauge must also be used to check wheel symmetry and ensure that the rim is correctly centered over the hub.
- When securing a wheel, keep the axle firmly pressed down into the axle holders. A wheel mounted at an angle will not give accurate results. Take particular care when tightening the quick-release skewer, as the tightening force may cause the axle to lift.
-
Cautions 2
- This tool is designed exclusively for truing bicycle wheels. Do not use it for any other purpose.
- Wheels are essential to safe bicycle operation. If you are unsure of your ability or become uncertain during the work, consult a professional bicycle shop.
- Wheel truing is performed at your own risk. MINOURA accepts no responsibility for the results of work performed using this product.
- MINOURA does not provide instruction on wheel truing techniques. Consult a qualified bicycle mechanic for guidance.
Portable Wheel Truing Stand with Support Angle Adjustment Shims
FT-100
- Product Title
- FT-100
- SKU
- 430-3500-00
- Color
- Black
- Net Weight
- 2.2 kgs
- Setup Dimensions
- [Folded] W225 × L465 × H145 mm
- Warranty
- 1 year
- Hub Width
- 85 - 135 mm
- Wheel Size
- up to 29 inch ( 700c )
- Download
- FT-100 Instructions Manual
Support Angle Adjustment Shims Instructions Manual
